Hello, Welcome to FCTEL Technology Co.,Ltd
National service hotline:+086 0571-87007055/56/57 CN


Products center

1*V.24 over ethernet(IP)

Type:FCT-V24 Message

Description:TDMoverIP-V.24 is mainly used for transmitting V.24 signal over IP network. It has 1 V.24 port 2 FE electrical port 1 FE optical port 1 Console Management Interface.Support web network management.

Product Description
TDMoverIP equipment is mainly used for transmitting V.24 signal over IP network. Enables operators and enterprises to seamlessly and reliably connect TDM devices and user Ethernet on a standard low-cost wireless or wired Ethernet / IP structure but no impact on quality. TDM over IP transparent to TDM signals ensures that any device with a physical V.24 interface is seamlessly connected such as the PBX mobile station SS7 signaling device and voice mail system. Can be used in IP-based communication systems such as: LAN WAN MAN and wireless networks.
With 1 V.24 port 2 FE electrical port 1 FE optical port 1 Console Management Interface

Functional Properties
provide Console (CLI) and WEB management interface convenient for installation;
Provide a V.24 circuit two Fast Ethernet electrical port a Fast Ethernet SFP optical port;
Transparent transmission of V.24 signals over IP network complies with the relevant provisions of ITU-T V.24
clock recovery using a unique clock algorithm stable frequency slight jitter and drift ;
Provides three kinds of loopback function: Ethernet local loopback (ANA) V.24 local loopback (DIG) V.24 remote loopback(REM);
Pseudo-random code test function easy to open the circuit can be used as a 2M BER tester to use
V.24 interface supports hot swap; support and DTE or DCE device interconnection
V.24 working clock can support the internal clock external clock line clock;
High transmission efficiency low transmission delay; Ethernet packet length can be set to support long packets; Support VLAN settings;
support V.24 link packet loss indication function;
high transmission efficiency up to 90% bandwidth utilization efficiency;
Support WEB network management software and hardware online upgrade locally and remotely;
a variety of power options: AC220V DC-48V / DC24V etc .

Technical Parameters
◆  E1 Interface
    Interface Standard:      comply with protocol G.703;
    Interface Rate:             n*64Kbps±50ppm;
    Interface Code:            HDB3;
    E1 Impedance:             75Ω (unbalance) 120Ω (balance);
    Jitter tolerance:            In accord with protocol G.742 and G.823
    Allowed Attenuation:   0~6dBm
◆  Ethernet interface (10/100M)
    Interface rate:              10/100 Mbps half/full duplex auto-negotiation
    Interface Standard:      Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
    MAC Address Capability: 4096
    Connector:                  RJ45 support Auto-MDIX
◆  Power
    Power supply: AC180V ~ 260V;DC –48V;DC +24V
    Power consumption: ≤10W
◆  Dimension          
    Product Size: Mini Type    216X140X31mm(WXDXH)
            Simple packaging:   274X193X84mm(WXDXH)
            Piece Weight :    1.25KG 
◆  Working environment
    Working temperature: -10°C ~ 50°C
    Working Humidity:        5%~95 % (no condensation)
    Storage temperature:   -40°C ~ 80°C
    Storage Humidity:         5%~95 % (no condensation)
Application Scheme
DataSheet Download