Hello, Welcome to FCTEL Technology Co.,Ltd
National service hotline:+086 0571-87007055/56/57 CN


Products center

Modular Multi-service over ethernet(IP)

Type:FCT-M Message

Description:Rack plug in type TDMoIP device can realize E1V.24V.35Voice signal transmission over IP. Max 4 slots.

Product Description
  TDMoverIP equipment is mainly used for transmitting E1 signal over IP network. Enables operators and enterprises to seamlessly and reliably connect TDM devices and user Ethernet on a standard low-cost wireless or wired Ethernet / IP structure but no impact on quality. TDM over IP transparent to TDM signals ensures that any device with a physical E1 interface is seamlessly connected such as the PBX mobile station SS7 signaling device and voice mail system. Can be used in IP-based communication systems such as: LAN WAN MAN and wireless networks.
  With two Gigabit Ethernet electrical ports a Gigabit Ethernet optical port a Console management interface you can plug E1 module / voice module / V.35 module / serial interface module; maximum capacity of 4 slots

Functional Properties
provide Console (CLI) and WEB management interface easy to install open;
provide two Gigabit Ethernet electrical port a Gigabit Ethernet SFP optical port;
E1 clock recovery using a unique clock algorithm technology the frequency reduction stable slight jitter and drift and restore the clock jitter and drift comply with G.823 / G.824 G.8261 norms;
High transmission efficiency low transmission delay; Ethernet packet length can be set to support long packets; Support VLAN settings up to 90% bandwidth utilization efficiency;
Provide 4 slots each slot can insert the following service card support for plug:
        4 × E1 module (75Ω) / (120Ω);
        4 × Framing E1 module (75Ω) / (120Ω) Any time slot can be set;
         4 × FXO / FXS / EM2-4 / magnet module;
         8 × FXO / FXS / second-line audio / magnet module;
         16xFXO / FXS / second-line audio / magnet module;
         2 × V.35 (2.048M fixed rate) module;
         2 × V.35 (N * 64K N = 1-32) module;
         4 × RS232 / 422/485 / switch module;
Support WEB network management software and hardware online upgrade locally and remotely;
A variety of power options: AC220V DC-48V / DC24V etc .; support AC + DC; AC + AC; DC + DC dual power mode;

Technical Parameters
◆  E1 Interface
    Interface Standard:      comply with protocol G.703;
    Interface Rate:             n*64Kbps±50ppm;
    Interface Code:            HDB3;
    E1 Impedance:             75Ω (unbalance) 120Ω (balance);
    Jitter tolerance:            In accord with protocol G.742 and G.823
    Allowed Attenuation:   0~6dBm
◆  Ethernet interface (10/100M)
    Interface rate:              10/100 Mbps half/full duplex auto-negotiation
    Interface Standard:      Compatible with IEEE 802.3 IEEE 802.1Q (VLAN)
    MAC Address Capability: 4096
    Connector:                  RJ45 support Auto-MDIX
◆  Power
    Power supply: AC180V ~ 260V;DC –48V;DC +24V
    Power consumption: ≤10W
◆  Dimension          
    Product Size: Mini Type    216X140X31mm(WXDXH)
            Simple packaging:   274X193X84mm(WXDXH)
            Piece Weight :    1.25KG 
◆  Working environment
    Working temperature: -10°C ~ 50°C
    Working Humidity:        5%~95 % (no condensation)
    Storage temperature:   -40°C ~ 80°C
    Storage Humidity:         5%~95 % (no condensation)
Application Scheme
Modular Multi-service over ethernet(IP)
DataSheet Download